New D24C Dust Chamber Features EZ Load Panel Option!
Envirotronics takes the back pain out of loading test specimens in dust chambers. The new removeable EZ Load Front Panel, an option available on Envirotronics' Dust Chambers, allows the test product to be placed on the specimen rack without having to lift it over the chamber wall and lower it on the rack. It's easy to load and easy on your back.
The removeable panel is held firmly in place by compression latches. The latch pressure and the front panel gasket create a positive seal that keeps the dust out of your lab and inside your chamber, where it belongs.
The front Panel has been removed, allowing easy access to the specimen rack
*The EZ Load Panel is an option that may not be available on all models.
To see just how quick and easy it is to load the D24C with the EZ Load Panel option, Watch the video. (Sorry, no audio).
Sand
and Dust Chambers
»D Series
The D Series chambers are
currently available in 2 models the D 24 and the
D60.
The
Envirotronics D Series Dust Chamber is designed
to test a component's resistance to a dust-filled
environment as defined in SAE Dust Test
Specifications J-575, subparagraph "G".
The product is placed on the specimen rack and
dust is agitated throughout the chamber by
injecting compressed air into each of the dust
troughs. The dust then settles, covering the
product under test.
The D Series chamber is constructed
of 16 gauge sheet metal with an air-dried
lacquer-sprayed finish. The hinged lid gives full
access to the workspace and is available with the
option of viewing windows. In the larger D60
model, (2) 8" to 10" fan blades are
mounted in the chamber to keep the dust in an
agitated state. The pressure relief vent which is
provided will prevent pressure buildup within the
cabinet while preventing the escape of dust
material.
A compressed air
pressure regulation system with filter and trap
is provided for connection to your air supply.
Air must be supplied at a minimum pressure of 80
psi and 10 CFM. The D Series' control timers
allow pre-setting the agitation, the number of
agitation intervals, and the number of cycles
with automatic shutdown at the end of the preset
number of cycles.
Also applicable
for Telcordia (Bellcore), and other Environmental
reliability life tests.
Would you like to print
a data sheet for this equipment?
