»StarVIEW

Chamber and Shaker Control Software

• Chamber Control The software works in conjunction with an external chamber controller to monitor the air temperature, product temperature, and optional humidity. The test operating profiles are entered into the StarVIEW software. The software then works in conjunction with the controllers, adjusting set points, and monitoring process variables.
• Shaker Control The repetitive shock shaker is also controlled by the software. Working in conjunction with the external controller, the energy applied to your product is accurately controlled.
• Rainfall Analysis Rainfall analysis is performed and displayed for your information.
• Fatigue Factor The rainfall analysis is used to apply Miner's Rule and calculate a mechanical fatigue factor.
• Accumulated Fatigue The fatigue factor measured over time will give you the total accumulated fatigue applied to the product.
• Auto Spectrum The vibration waveform is captured, the fast Fourier applied, to see where in the spectrum the vibration energy lies.
• Documents The graphical screens can easily be imported into your documents through the clip board, or with Windows(tm) meta files, or from previously stored data.
• Graphic Screens The color choices of the graphic screens can be set to your liking or reset to the default settings.
  

Would you like to print a data sheet for the StarVIEW Chamber and Shaker Control Software?

›Click here for downloadable StarVIEW PDF File

Viewing and printing PDF files will require Adobe® Acrobat® Reader.
Adobe® Acrobat® Reader is available for free download at :

›Click to return to AGREE & HALT/HASS Environmental Test Equipment List

Familiar Microsoft Windows Look
The Microsoft Windows operating system is the most widely used computer system today. Our use of this system makes the software "user friendly". Because ultimately you, our customer, must run the Star Plus System, we have created an interface which can be quickly mastered.

»Hardware Specifications

• IOtech Input System a powerful IOtech data acquisition unit provides the horsepower to run the data acquisition system.
  
• Four Input Channels The standard system comes complete with four 16-bit input A/Ds.
  
• Additional Inputs Additional input channels can be added in multiples of four. They are parallel inputs with supporting IOtech interfaces. Up to 16 channels can be added.
  
• Additional Thermocouples Additional thermocouple inputs can be added. Up to 14 channels can be monitored simultaneously.
  
• Remote Control The controller can be started and stopped remotely with a TTL level input signal.
  

Go to:

Star Plus System Vibration Table Information

Star Plus System Chamber and Console Information

Star Plus System Intro Page

Please direct any inquiries to:
›sales@envirotronics.com