TSL Series Model TSL5-2-5-WC
The TSL
Series Liquid-to-Liquid thermal shock bath is
designed to operate within current military
standards for semiconductor devices such as
Mil-Std 883 Method 1011.7 and Mil-Std 202F Method
107G. The system is designed to be operated with
a load of between 7.5 and 10 lbs. of product and
fixture.The basket travels between the hot bath and the cold bath by means of a robotic arm.
There is an agitator system in each bath to ensure good temperature distribution and the large transparent Plexiglas lid allows full access to the baths for loading and unloading the test basket.
»Standard
Features:
- 13.25" W
x 12" D x 6" H product basket
- Full opening Plexiglas door to access baths
- ETL (UL STD
508A) approved main power panel
- 2 Agitator
systems, one in each bath
- Electrical
isolation of basket through 1 Megohm
resistor
- Bank of
immersion heaters in hot zone
- Bank of
immersion heaters in cold zone (used to
raise fluid temperature to ambient)
- Expansion
tank for fluid pressure during transfer
- Fluid
filtering system
- Set of 4
casters with levelling legs
Would you like to print
a data sheet for this equipment?
›Click
here for downloadable TSL Series Literature
Viewing and printing PDF files will require Adobe® Acrobat® Reader.
Adobe® Acrobat® Reader is available for free download at:
›Click to return to Thermal Shock Environmental Test Equipment List
|
TSL5-2-5-WC shown with optional
Honeywell DR450T
»Instrumentation:
- Envirotronics Systems Plus programmer/controller
- Honeywell DR450T Dual Pen
Chart Recorder (optional)
- Running Time Meter connected
to Auto Operation Switch
- Auto/Manual basket transfer
switch
- Manual high heat limit on hot bath (Max. +160nt>°)
»Refrigeration
System
- 5 HP water cooled, attached
cascade refrigeration system utilizing
R404A/R508B
- Machinery quiet package
lowers noise levels 72 dBa
Please direct any inquiries
to:
›sales@envirotronics.com
|
